Standards

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, (Vol. 01.03)

Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled, (Vol. 01.03)

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, (Vol. 01.03)

Standard Specification for Structural Steel for Ships (Vol. 01.04)

Standard Specification for Carbon Steel Track Bolts and Nuts (Vol. 01.04)

Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes, (Vol. 01.01)

Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes, (Vol. 01.01)

Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

Standard Test Methods and Definitions for Mechanical Testing of Steel Products, (Vol. 01.01)

Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. (Vol. 01.01)

Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements

Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

Standard Specification for Zinc-Coated Steel Structural Wire Rope

Standard Specification for Tin Mill Products, General Requirements

Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements

Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements

Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

Standard Specification for Rolled Floor Plate, Stainless Steel

Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process

Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction (Discontinued 2000) No Replacement

Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Discontinued 2002) No Replacement

Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial (Withdrawn 2000) Replaced by A1011/A1011M

Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000) Replaced by A1011/A1011M

Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled (Withdrawn 2000) Replaced by A1008 and A1011/A1011M

Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Standard Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Standard Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000) Replaced by A1011/A1011M

Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000) Replaced by A1008/A1008M

Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000) Replaced by A1011/A1011M

Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality (Withdrawn 2001) Replaced by A1018/A1018M

Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled (Withdrawn 2001) Replaced by A1018/A1018M

Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability (Withdrawn 2001) Replaced by A1018/A1018M

Standard Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Standard Specification for Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) Replaced by A996/A996M

Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) Replaced by A996/A996M

Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997) No Replacement

Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric (Discontinued 2002) No replacement

Standard Specification for Aluminum-Coated Steel Barbed Wire (Discontinued 2002) Replaced by A121

Classification for Hardware for Wood Fencing (Discontinued 2000) No Replacement