Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metalmore wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144" and 72"
Specifications:CDA 954 UNS 95400 less
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metalmore wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144" and 72"
Specifications:CDA 954 UNS 95400 less
Unit of Measure
Specifications
Material |
N/A Aluminum Bronze |
Shapeform |
N/A Plates |
Plate Thickness x Width |
N/A 1/2 x 3 1/2 inches |
Working Decimal Equivalent |
N/A 0.500 x 3.500 inches12.7 x 88.9 mm |
Plate Thickness |
N/A 1/2 inches |
Width |
N/A 3 1/2 inches |
Weight |
N/A 6.7698 lbs/ft10.07481636 kg/m |
Weight per 72" Length |
N/A 40.619 lbs18.4207165 kg |
Weight per 144" Length |
N/A 81.238 lbs36.841433 kg |
ASTM Specification |
N/A CDA 954 UNS 95400 |
Standard Length |
N/A 72 inches144 inches |
