Standards

If you don't find what you need here, please call or contact us.

1. A1008/A1008M-02e1 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, (Vol. 01.03)
2. A109/A109M-00e1 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled, (Vol. 01.03)
3. A1011/A1011M-02 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, (Vol. 01.03)
4. A131/A131M-01 Standard Specification for Structural Steel for Ships (Vol. 01.04)
5. A183-98 Standard Specification for Carbon Steel Track Bolts and Nuts (Vol. 01.04)
6. A209/A209M-98 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes, (Vol. 01.01)
7. A214/A214M-96(2001) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes, (Vol. 01.01)
8. A283/A283M-00 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
9. A308-02 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
10. A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
11. A370-02e1 Standard Test Methods and Definitions for Mechanical Testing of Steel Products, (Vol. 01.01)
12. A409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
13. A463/A463M-02a Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
14. A480/A480M-02 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
15. A500-01a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
16. A513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
17. A53/A53M-01 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. (Vol. 01.01)
18. A568/A568M-02 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements
19. A572/A572M-01 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
20. A599/A599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
21. A603-98 Standard Specification for Zinc-Coated Steel Structural Wire Rope
22. A623-02 Standard Specification for Tin Mill Products, General Requirements
23. A624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
24. A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
25. A632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
26. A635/A635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements
27. A653/A653M-02a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
28. A656/A656M-00a Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
29. A659/A659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
30. A682/A682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements
31. A749/A749M-97 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements
32. A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
33. A767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
34. A792/A792M-02 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
35. A793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
36. A875/A875M-02a Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
37. A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
38. A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
39. A924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

Discontinued Standards

Volume 01.01, January 2003

A520 Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction (Discontinued 2000) No Replacement

A851 Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Discontinued 2002) No Replacement

Volume 01.03, February 2003

A366/A366M Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

A569/A569M Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial (Withdrawn 2000) Replaced by A1011/A1011M

A570/A570M Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000) Replaced by A1011/A1011M

A607 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled (Withdrawn 2000) Replaced by A1008 and A1011/A1011M

A611 Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

A620/A620M Standard Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

A622/A622M Standard Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000) Replaced by A1011/A1011M

A715 Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000) Replaced by A1008/A1008M

A715 Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000) Replaced by A1011/A1011M

A907/A907M Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality (Withdrawn 2001) Replaced by A1018/A1018M

A935/A935M Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled (Withdrawn 2001) Replaced by A1018/A1018M

A936/A936M Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability (Withdrawn 2001) Replaced by A1018/A1018M

A963/A963M Standard Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

A969/A969M Standard Specification for Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

Volume 01.04, January 2003

A616/A616M Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) Replaced by A996/A996M

A617/A617M Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) Replaced by A996/A996M

A864/A864M Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997) No Replacement

Volume 01.06, February 2003

A584 Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric (Discontinued 2002) No replacement

A585 Standard Specification for Aluminum-Coated Steel Barbed Wire (Discontinued 2002) Replaced by A121

F1222 Classification for Hardware for Wood Fencing (Discontinued 2000) No Replacement

If you don't find what you need here, please call us at 800-487-8335 or 954-332-2290.
We'll find it for you...Fast!